Видео

Should I do this if my drives are in an nvr which is continuously recording?

Thank you.....!

How can you check your AC unit with this device?

Amazing video, thank you for this valuable information!

I used them on my house and they work quite well. Installed them with no fasteners. They stay put, and as you said, I haven’t seen rain running off the gutters. I do have to sweep them off periodically. The roof pitch is low as I live in Georgia, but probably most gutter covers will accumulate some debris. For my house the cost was about $300. My son and I installed them in about an hour. From the street you can’t see them. I bought a broom from Home Depot, stuck the handle in thru the bristles and sweep debris off from ground level. I’m very happy with the results.

You do change engine oil. But the pump is sealed so there is nothing to change in the pump. There is no fuel filter per se either. It’s straight gas, so if you can find ethanol free, use that. They recommended changing the spark plug once a year ( I didn’t do that but did pull it once to see how it was burning). The oil filter is foam and does require oiling. I use spray oil designed for foam versus the motor oil dip. It’s been a good washer. Take the time to clean out the soap tank, and its plastic line that goes to the injector. A 13 mm socket to remove the diverter fitting and clean the spring and ball as needed. Also where it attaches to the outlet, you need to keep that little dimple area clean so the orifice is clear. They get impacted and you’ll need a pick to clean it out.

Bro u have to change oil

This has been the biggest POS I’ve owned Hasn’t worked right since I bought it

"Vegetables"....hmm🤔...if you say so..😉

Great video. Definitely go to a home depot or lowes and buy and install yourself!!! We were scammed and lied to by leaf filter. Save your money and do it yourself!!!!

The most worthless video I have ever seen

Thanks for the update, very helpful especially with contrast to adjoining gutter. I bought these as well, toughest part was end fitting, where gutter goes beyond roofline and custom cuts have to be made. Not a problem, but a little forethought into where to make cuts and final forming to prevent outside intrusion from debris.......and birds. My biggest PITA was east side of house (ranch) where gutter runs 94" long with only 2 down spouts. So with these, my neighbors no longer are entertained by my ladder climbing during driving rains. Take that mother nature...🤣

UPDATE:1 year and still cranks within the first 2-3 pulls. Probably will buy another when this one finally does bite the dust ruclips.net/user/postUgkx43QMbQqu67IZadu9ou8Sg1BdrunMRNqX . No issues at all. Very happy with it.UPDATE: After 6 months of use and over 70 uses I would still highly recommend this pressure washer. It does vibrate a decent amount but never had it “walk” like others have mentioned. No oil leaks, still seems to run like the day I bought it. Still cranks within 2-3 pulls every time. Very happy with my purchase!Have used it about a dozen times now. Plenty of power, cranks up on 1-2 pulls every time. My only complaint would be I wish it was a little taller to make it easier to walk with it (hits my ankles a lot) and that the two hose connections were a little further apart but it hasn’t caused me any issues. Seems to run a good 1-1/2-2 hrs on a full tank, overall a well built machine and definitely worth the money in my opinion.

Great price and intro

I have them installed on the whole house they do very well I have a lot of pine trees and in the spring the helicopter leaves fall from my maple trees as well. A good wind and it blows them away. Haven’t went on my roof in 2-3 years now. The do fine. The little dented that gets thru them goes right thru my downspout and out the emitter in my yard. I guess over time even if you do have the helicopter leaves on them they will decompose and will go away over time.

Thank you for this tutorial, appreciate! 👍Fixed two WD30EZRZ, which already counted 244k and 100k heads load/unload cycles (of 300k projected). In comparison WD Black and HGST 7k6000 of similar age and usage profile counted just around 6k! A real time bomb by WD ((( Hopefully my HDDs will stop killing themselves and keep working long enough.

I need it

I finished installing these today on the 4th side of my house. Yesterday with only 3 sides covered we had a torrential rain. I ran outside with my umbrella and carefully watched for the next 5 minutes. I observed no over-spill in the usual or any other places in my gutters and the downspouts were gushing water. I am so very pleased that I did this. I will turn 69 next month and I don't like going up on the ladder anymore. This should minimize that being necessary. They are well worth the $7.00 that Home Depot charges for them. I won't tell you where, but I actually bought them for $1.24 each after my veteran's discount. As the saying goes, seek and ye shall find. If you can find them at this price, jump on them and buy extra. Definitely invest the $15 to buy a decent pair of tin snips and notch one side of each section 1/2 to 1 inch and overlap them. It's well worth the extra cost. And if you have trouble getting them under your shingles, don't be afraid to trim an inch off the part that goes under the shingles.

It’s a bummer there aren’t other pocket clip mounting points. Is the g10 threaded or is there something metal there?

15c those were the days

How do you install these on a Tile Roof? Do you have pix of a tile installation?

Thank you for this video brother was one of the most informative and educational and to the point of what I needed do more videos have a good one brother thank you for the links I'm ordering it now

It works if you connect more than one WD HDDs to your PC. The program will set the same timer on all WD HDDs synchronously.

Hello - I was given this same pressure washer from a neighbor. The neighbor left ethanol gas in it over the winter. If you still have this pressure washer, would you be able to take a photo of the carb and the spring placement. The starter/fan shroud needs to come off. I've been looking all over youtube and the parts pages and I can find the part numbers, but no actual documentation showing the springs on the carb. There should be 3 springs. Could you help me out on this?

There is Boker USA and you could ask them. Thats a lock, probably from a euro knife, non auto. Ya know, you can buy knives straight from Boker. No dumbass middleman involved. Expect to pay pure msrp retail. There multiple versions. I charge $100 a hr. to teach, how to use the internet.

I had it for 1 year won’t turn on I did everything on it to make it run and nothing !!!

blur the serial out on the first part, then show it at the end anyway - seems pointless

That’s a bad ass knife one of the best EDC’s ever IMO

What is a good part # for a pump on this model

My lw para3 sucks, when u roll it open it clicks , hesitates 3 times prior to locking, my para2 does not do that, para 3 is going back...

I Carry a lil native with a deep carry clip.

I am trying to find the model of the honda motor to see if there are reviews of the motor. II know Honda is The best of small engines. However this model may have had cost cutting

Bruh!!! You helped me out so much on this video. None of the other videos speak on how and when the detergent is dispensed. Thank you so much!!!

Is the g10 grippy or smooth? I really want grippy scales.

Thanks for making this! It was helpful.

you installed them incorrectly you have to notch them and install with a slight overlap and they need to be screwed on

Где купить?

I have the 2800psi model. It is sure thirsty for gas I hate how the handle stores and the way the hose hangs on that cheap wire is just garbage, it’s a pain hooking up the hosing up from underneath I have to tip the machine over just to access it, Initially when I use it loses pressure for no reason at all then goes away, I’m thinking about selling it and buying a Simpson with a quality Honda engine and cat pump but that’s $1000. I’ll just say this is a good beginner pressure washer if you haven’t used one before and can handle any job well it does a decent job overall but it definitely lacks in a lot of areas but that is to be expected for a pressure washer that is $300-$400 it’s not until you spend $500-$1000+ when you really start to experience the quality

Joe, Hello! But I don't have this `nod.exe`. I have no mind what is the problem.

Thanks for the video. you mentioned things the manual does not even tell us. So I like watching videos from people who use products, as opposed to engineers or writers who probably nevr even used it.

Can u wash ur car with it?

Also have the exact same model. Another tip, don't leave the fully connected wand in the holder while moving around. My yellow tip scraped across the wheel and ended up clogging..... didn't realize what the black stuff was that was compacted in there until I saw this video. All in all a decent pw for what I use it for. Siding, sidewalks and the deck. Might try it on the boat next

I have the same machine. When it is underload, engine runs great. But when it idles, the engine dips about everyone 15 seconds for duration less than a second and gets back to idling normal again. Then the cycle repeats.

Thank you for your video. Just letting you know it helped me a great deal. I installed 10 of them today as a test and can't wait to see if they work as well as yours does. Thanks again for your helpful video.

Thanks. A very simple and helpful video. I too am concerned about products that will not drain into the gutter and instead roll that heavy rain right onto the ground near the foundation, exactly where I don’t want it. If the big stuff is being caught, I’ll be good. Again, excellent info!

I just bought this same pressure washer. With the Honda motor. Nice video

Just tried on my WD blue, it says it’s set to 3minutes in the wdidle3 software but it hasn’t worked

I got the electric start version, its gas, you can through a 20v craftman battery into it

Just get some brass scales for it

Español